Alumni (keep your picture and information up-to-date) |
|
|
|
周祐賢 (Yu-Hsien Chou), M.S. (2024) |
|
Thesis: |
Fluorine Rubber/Carbon Fillers/Ionic Liquids Composites for Flexible Thermoelectric Generator |
|
氟橡膠/碳填材/離子液體複合材料用於柔性熱電發電機 |
|
Current position: 台積電 |
|
|
|
|
|
|
廖政豪 (Cheng-Hao Liao), M.S. (2024) |
|
Thesis: |
Recombinant Spider Silk as an Effective Additive in PEO-Based Electrolytes for High-Performance Solid Lithium-Ion Batteries |
|
以重組蜘蛛絲提升聚環氧乙烷電解質性能應用於全固態鋰離子電池 |
|
Current position: |
|
|
|
|
|
|
高嘉榮 (Chia-Jung Kao), M.S. (2024) |
|
Thesis: |
Perforated Macroporous Membranes Cast through Double-Sided Evaporation of Polymer Liquid Films |
|
藉由雙面揮發高分子液膜製備巨孔穿透薄膜 |
|
Current position: 聯電 |
|
|
|
|
|
|
鍾旻潔 (Min-Chieh Chung), M.S. (2024) |
|
Thesis: |
Investigating the Influence of Modification through Compounding and Solid-State Polymerization on the Rheological Properties of Thermoplastic Polyester Elastomer |
|
探討以混煉法與固態聚合法改質對熱塑性聚酯彈性體流變性質的影響 |
|
Current position: 台積電 |
|
|
|
|
|
|
廖益誠 (Yi-Cheng Liao), M.S. (2023) |
|
Thesis: |
Preparation and application of poly(4-vinylpyridine-co-styrene) porous fiber aerogels |
|
4-乙烯基-苯乙烯共聚物多孔纖維氣凝膠的製備及應用 |
|
Current position: 台積電 |
|
|
|
|
|
|
林亨宸 (Heng-Chen Lin), M.S. (2023) |
|
Thesis: |
Development of Polybutylene Succinate/Cellulose Nanocrystal/Epoxidized Soybean Oil Biodegradable Composite |
|
聚丁二酸丁二醇酯/纖維素奈米微晶/環氧大豆油生物可降解摻合物 |
|
Current position: 台積電 |
|
|
|
|
|
|
劉宸妤 (Chen-Yu Liu), M.S. (2022) |
|
Thesis: |
Compounding Process Optimization and Structure/Property Analysis for PET/PEF Blends |
|
PET/PEF摻合物混煉條件優化與結構性質分析 |
|
Current position: 工研院 |
|
|
|
|
|
|
曹子涵 (Tzu-Han Tsao), M.S. (2022) |
|
Thesis: |
Utilization of plasticizers to enhance the elongation of poly(ethylene-co-vinyl alcohol)/cellulose composites |
|
利用增塑劑提升乙烯乙烯醇共聚物/纖維素複合材料之伸長率 |
|
Current position: 美光科技 |
|
|
|
|
|
|
陳芳庭 (Fang-Ting Chen), M.S. (2022) |
|
Thesis: |
Fabrication of Porous Fibers by Electrospinning and Phase Separation Method |
|
藉由靜電紡絲技術與相分離法製備多孔纖維 |
|
Current position: 長春石化 |
|
|
|
|
|
|
吳宜庭 (Yi-Ting Wu), M.S. (2022) |
|
Thesis: |
Effects of Ionic Liquids on the Mechanical and Electric Properties of Stretchable Conductive Fluorine Rubber/Carbon Nanotube /Carbon Black Composite Elastomers |
|
離子液體對氟橡膠/奈米碳管/碳黑可拉伸導電彈性體的機械性質及電性影響 |
|
Current position: 美光科技 |
|
|
|
|
|
|
江岱樺 (Dai-Hua Jiang), Ph.D. (2021) |
|
Thesis: |
Flexible Light-Emitting Diode Application of Polyfluorene-Based Conjugated Polymers |
|
聚芴基共軛高分子在拉伸發光二極體元件之應用 |
|
Current position: |
|
|
|
|
|
|
(Kai-Pin Chang), M.S. (2021) |
|
Thesis: |
Preparation of Poly(4-vinylpyridine-co-styrene) Porous Fibers for Aerosol Adsorption |
|
4-乙烯基-苯乙烯共聚物孔洞纖維的製備以及其在空氣懸浮微粒吸附之應用 |
|
Current position: 台積電 |
|
|
|
|
|
|
陳鈺琦 (Yu-Chi Chen), M.S. (2021) |
|
Thesis: |
Development and Application of Waterborne Epoxy/Acrylic Resins |
|
水性環氧壓克力樹脂之開發與應用 |
|
Current position: 台積電 |
|
|
|
|
|
|
黃郁茹 (Yu-Ju Huang), M.S. (2021) |
|
Thesis: |
Enhancement in Gas Barrier Properties of Polyethylene Terephthalate by Blending with Polyethylene Furanoate and Cellulose |
|
利用PEF及纖維素提升PET之阻氣性質 |
|
Current position: PhD student at Tokyo Tech |
|
|
|
|
|
|
姜政廷 (Cheng-Ting Chiang), M.S. (2020) |
|
Thesis: |
Effects of Additives on the Crystallization and the Field-Effect Transistor performance of Fullerene Derivative |
|
添加劑對富勒烯衍生物結晶行為及其場效電晶體效能之影響 |
|
Current position: |
|
|
|
|
|
|
王俐婷 (Li-Ting Wang), M.S. (2020) |
|
Thesis: |
Design, Synthesis, and Applications of Emulsifiers for Waterborne Epoxy Resins |
|
水性環氧樹脂乳化劑之設計、合成與應用 |
|
Current position: 南亞塑膠 |
|
|
|
|
|
|
黃譯鋐 (I-Hung Huang), M.S. (2020) |
|
Thesis: |
Electrical and Mechanical Properties of the Stretchable Conductive Elastomers Formed by Fluorine Rubber/Silver-Coated Copper/Ionic Liquid |
|
氟橡膠/銀銅粉/離子液體可拉伸導電彈性體的電性與機械性質分析 |
|
Current position: 台積電 |
|
|
|
|
|
|
林佳怡 (Chia-Yi Lin), M.S. (2020), Research Assistant (2020 - 2021) |
|
Thesis: |
Self-Assembly Mechanisms and Rheological Behaviors of Lecithin/Inorganic Salt Mixtures in Low-Polar Organic Solvents |
|
卵磷脂/無機鹽類於低極性有機溶劑中的自組裝機制及流變行為 |
|
Current position: PhD student at Cornell University |
|
|
|
|
|
|
陳衍儒 (Yan-Ru Chen), M.S. (2019) |
|
Thesis: |
Study on the Formation Mechanism of Nonsolvent-Induced Macroporous Electrospun Fibers and Their Adsorption Applications |
|
探討非溶劑誘導巨孔電紡絲的形成機制與吸附應用 |
|
Current position: PhD student at UIUC |
|
|
|
|
|
|
許博雅 (Po-Ya Hsu), M.S. (2019) |
|
Thesis: |
Study on Water-Borne Core-Shell Acrylic Pressure Sensitive Adhesives |
|
以乳化聚合製備之核-殼壓克力感壓膠性質分析 |
|
Current position: |
|
|
|
|
|
|
朱佳儀 (Jia-Yi Chu), M.S. (2019) |
|
Thesis: |
Effects of Branched Side Chain on the Physical Properties and Solar Cell Performance of Polythiophene |
|
分枝側鏈對聚物性與太陽能電池效能之影響 |
|
Current position: 遠東新世紀 |
|
|
|
|
|
|
劉文賢 (Wen-Hsien Liu), M.S. (2019) |
|
Thesis: |
Effects of ionic liquid on the mechanical and electric properties of fluorine rubber/silver-coated copper composites |
|
離子液體對於氟橡膠/銀銅粉複合材料的機械性質及電性之影響 |
|
Current position: 南亞科技 |
|
|
|
|
|
|
張泓銘 (Hung-Ming Chang), M.S. (2018), Research Assistant (2019 - 2020) |
|
Thesis: |
Contrasting effects of temperature on the rheology and self-assembled structures of lecithin/ inorganic salts mixtures in non-polar solvent |
|
溫度對卵磷脂與無機鹽類於低極性溶劑中自組裝結構與流變行為的影響 |
|
Current position: PhD student at UC Irvine |
|
|
|
|
|
|
陳俞合 (Yu-Ho Chen), M.S. (2018) |
|
Thesis: |
Study on Structure and Properties for Vinyl Acetate-Ethylene Copolymer from Emulsion Polymerization |
|
VAE乳液結構性質分析 |
|
Current position: 科盛科技股份有限公司 |
|
|
|
|
|
|
楊子徹 (Tsu-Che Yang), M.S. (2018) |
|
Thesis: |
Effects of Additives on the Crystallization of PC71BM and the Efficiency of Polymer Solar Cells |
|
添加劑對PC71BM結晶行為與高分子太陽能電池效率之影響 |
|
Current position: 美光科技 |
|
|
|
|
|
|
張加儒 (Chia-Ju Chang), M.S. (2018) |
|
Thesis: |
Microencapsulation of epoxy curing agent by oil-in-water emulsion and solvent evaporation method |
|
以有機相/水相乳化液及溶劑揮發法製備含環氧樹脂硬化劑之微膠囊 |
|
Current position: 台積電 |
|
|
|
|
|
|
蔡秉均 (Ping-Chun Tsai), Ph.D. (2017) |
|
Thesis: |
Uniform Luminous Perovskite Nanofibers with Color-Tunability and Improved Stability Prepared by One-Step Core/Shell Electrospinning |
|
|
|
Current position: |
|
|
|
|
|
|
陳柏瑜 (Po-Yu Chen), Ph.D. (2017) |
|
Thesis: |
Preparation of Nonsolvent-Induced Macroporous Electrospun Fibers and their Adsorption Behaviors |
|
製備非溶劑誘導巨孔電紡絲纖維及其吸附行為探討 |
|
Current position: |
|
|
|
|
|
|
廖彗里 (Hu-Li Liao), M.S. (2017) |
|
Thesis: |
Relationship between the Morphology and the Solar Cell Performance of PTB7-Th/PCBM Blends |
|
PTB7-Th/PCBM混摻形態與太陽能電池效能的關係 |
|
Current position: 瑞健公司 |
|
|
|
|
|
|
鐘筱崴 (Hsiao-Wei Chung), M.S. (2017) |
|
Thesis: |
Preparation of Biodegradable Porous Fibers by Combining Nonsolvent-Induced Phase Separation and Electrospinning Method |
|
結合非溶劑誘導相分離與電紡絲技術製備生物可降解孔洞纖維 |
|
Current position: 台積電 |
|
|
|
|
|
|
李家淳 (Chia-Chun Lee), M.S. (2017) |
|
Thesis: |
Control over the self-assembled ordered nanostructures of phospholipids by incorporation of cholesterol |
|
利用膽固醇調控磷脂質的自組裝奈米有序微結構 |
|
Current position: |
|
|
|
|
|
|
林晨歆 (Chen-Shin Lin), M.S. (2016) |
|
Thesis: |
Self-assembled behaviors of lecithin/inorganic salt in thin films |
|
卵磷脂與無機鹽類在薄膜上自組裝行為研究 |
|
Current position: |
|
|
|
|
|
|
楊欣霓 (Hsin-Ni Yang), M.S. (2016) |
|
Thesis: |
Electrospun Fibers of Lecithin/Bile Salt from Wormlike Micellar Solutions |
|
由蟲狀微胞溶液製備卵磷脂/膽鹽靜電紡絲纖維 |
|
Current position: |
|
|
|
|
|
|
(Ya-Ying Chang), M.S. (2016) |
|
Thesis: |
Relationship between Phase-Separated Structures and the Efficiency and Stability of Polymer Solar Cells |
|
相分離結構與高分子太陽能電池效率及穩定度之相關性 |
|
Current position: 台電 |
|
|
|
|
|
|
蔡瞻宇 (Zhan-Yu Tsai), M.S. (2015) |
|
Thesis: |
The Influence of Fullerene Intercalation on Efficiency and Stability of Polymer Solar Cells |
|
富勒烯插層效應對於高分子太陽能電池的效率與穩定性之影響 |
|
Current position: Lasertec (雷泰光電) |
|
|
|
|
|
|
林詩婷 (Shih-Ting Lin), M.S. (2015) |
|
Thesis: |
Interactions between lecithin and inorganic salts in oil and their effects on reverse micellization |
|
無機鹽類與卵磷脂在有機溶劑中的作用力與其對自組裝行為的影響 |
|
Current position: 台塑 |
|
|
|
|
|
|
鄭智洋 (Chih-Yang Cheng), Ph.D. (2015) |
|
Thesis: |
Self-assembled Structures and Rheological Properties of Lecithin/Bile Salt Mixtures in Aqueous Solution |
|
卵磷脂與膽鹽於水溶液中自組裝結構與流變性質研究 |
|
Current position: 台塑 |
|
|
|
|
|
|
(Chung-Hao Liu), M.S. (2014) |
|
Thesis: |
Using Regiorandom Poly(3-hexylthiophene) to Enhance the Stability of Polymer Solar Cells |
|
利用無規整度聚3-己基改善太陽能元件效率穩定度 |
|
Current position: PhD student at the University of Connecticut |
|
|
|
|
|
|
賴姿羽 (Tzu-Yu Lai), M.S. (2014), Research Assistant (2014 - 2015) |
|
Thesis: |
Phase Behaviors and Structures of Supramolecules Formed by 4-Vinylpyridine-Based Polymers and Fan-Like Benzoic Acid Derivatives |
|
4-乙烯基高分子與扇狀苯甲酸衍生物形成之超分子的相分離行為與結構分析 |
|
Current position: 3M |
|
|
|
|
|
|
林芳羽 (Fang-Yu Lin), M.S. (2014) |
|
Thesis: |
Polymersomes with High Loading Capacity Prepared by Solvent Annealing Method and Their Controlled Release Behaviors |
|
溶劑退火方式製備高裝載性嵌段高分子奈米膠囊與其控制釋放 |
|
Current position: |
|
|
|
|
|
|
簡珮珍 (Pei-Zhen Jian), M.S. (2013) |
|
Thesis: |
Electrospun Nanofibers as Polymer Gate Electrets on Pentacene Transistor Memory: Morphology, Structure, and Electrical Characteristics |
|
複合靜電紡絲纖維在非揮發性有機記憶體上之應用與形態分析 |
|
Current position: |
|
|
|
|
|
|
張硯翔 (Yen-Hsiang Chang), M.S. (2013) |
|
Thesis: |
Control over the Orientation of Block Copolymer Thin Films Using Cross-Linked Random Copolymers as Surface Modifiers |
|
利用無規則共聚物表面改質調控嵌段共聚物薄膜之方向性 |
|
Current position: |
|
|
|
|
|
|
林峰正 (Feng-Cheng Lin), M.S. (2012) |
|
Thesis: |
Control Over the Microdomain Orientation of Block Copolymers Confined in Cylindrical Nanopores by Surface Modification |
|
利用表面改質調控嵌段共聚物在奈米柱狀孔洞中微結構的方向性 |
|
Current position: |
|
|
|
|
|
|
彭翊雯 (Yi-Wen Peng), M.S. (2012) |
|
Thesis: |
The rheological properties of physically and chemically crosslinked gelatin gel |
|
物理與化學交聯明膠的流變性質研究 |
|
Current position: |
|
|
|
|
|
|
莊友豪 (Yu-Hao Chuang), M.S. (2012) |
|
Thesis: |
Self-assembly and encapsulation behaviors of block copolymers in small molecule drugs |
|
團聯共聚物在小分子藥物中的自組裝與包覆行為 |
|
Current position: |
|
|
|
|
|
|
邱懷德 (Hwai-Te Chiu), M.S. (2011) |
|
Thesis: |
The Spatial Distribution of Nanoparticles and Nanorods in Block Copolymer-Based Supramolecules |
|
奈米粒子與奈米柱在超分子共聚物中的空間分布探討 |
|
Current position: 台積電 |
|
|
|
|
|
|
林心冠 (Xin-Guan Lin), M.S. (2011) |
|
Thesis: |
Random Copolymer Mats for Controlling the Orientation of Block Copolymers and Their Supramolecules in Thin Films |
|
無規則共聚物表面改質對嵌段式共聚物及其超分子薄膜結構之影響 |
|
Current position: 旺宏電子 |
|
|
|
|
|
|
饒晉維 (Ching-Wei Njauw), M.S. (2011) |
|
Thesis: |
The Rheology, Nanostructures and Formation Mechanism of Lecithin Reverse Wormlike micelles Induced by Bile Salts |
|
軟磷脂和膽鹽形成之反蠕蟲狀微胞的流變性質、溫度效應及誘發效率之研究 |
|
Current position: |
|
|
|
|
|
|
游政豪 (Cheng-Hao Yu), M.S. (2010) |
|
Thesis: |
Self-Assembly of Polystyrene-b-poly(4-vinylpyridine) in Deoxycholic acid |
|
苯乙烯-乙烯團聯共聚物在膽酸中的自組裝形態 |
|
Current position: 頎邦科技 |
|
|
|
|
|
|
李治宏 (Chih-Hung Lee), M.S. (2010) |
|
Thesis: |
Grafting Effects on the Morphology of
Block Copolymer-based Supramolecular Thin Films |
|
接枝效應對超分子共聚物薄膜
微相分離形態之影響
|
|
Current position: 工研院材化所 |
|
|
|
|
|
|
李家豪 (Chia-Hao Lee), M.S. (2010) |
|
Thesis: |
Study on the Morphology of Supramolecular Poly(styrene-b-4 vinylpyridine)(3-pentadecylphenol)/homopolystyrene Blends |
|
梳狀超分子共聚物摻合均聚物之形態研究 |
|
Current position: 亞東石化 |
|
|
|
|
|
|
黃瑋翰 (Wei-Han Huang), M.S. (2010) |
|
Thesis: |
Effects of Solvent Annealing on the Nanostructure of Supramolecular Thin Films |
|
溶劑蒸氣對超分子薄膜奈米結構之影響 |
|
Current position: |
|
|
|
|
|
|
孫翰笙 (Han-Sheng Sun), M.S. (2009), co-advised by Prof. Wen-Chang Chen |
|
Thesis: |
Synthesis, Morphology and Properties of Rod-coil Block Copolymers, Poly(fluorene)-block-Poly(4-vinylpyridine) |
|
芴系硬桿-柔軟嵌段式共聚物:PF-b-P4VP之合成、型態及特性研究 |
|
Current position: |
|
|
|