本所成員
------------------------
師資陣容
職員
學生
校友
-------------------------
回首頁
-------------------------
國立台灣大學
-------------------------


林金福　教授
研究室：工綜474室
聯絡電話：(02)2392-8290
傳真：(02)2363-4562
電子郵件：kflin@ntu.edu.tw
實驗室：高分子及複合材料實驗室 工綜館353 355室 聯絡電話：(02)23630231~3399


■學歷

美國紐約科技大學博士　　1980.09 - 1985.05
國立清華大學碩士　　　　1975.09 - 1977.05
國立中央大學學士　　　　1971.09 - 1975.05


■主要研究領域

光電高分子、高分子奈米複合材料、高分子熱力學、高分子物性


■研究著作選列

  1. S-A. Chen*, K-F. Lin, 1980, "Minimum End Time Policies for Batchwise Radical Chain PolymerizationⅡ: A Two Stage Process for Styrene Polymerization," Chemical Engineering Science, 35 (11), 2325.
  2. S-A. Chen*, K-F. Lin, 1980, "Optimal Temperature Policies for Batch-Wise Thermally-Initiated Bulk Polymerization of Styrene," J. of the Chinese Institute of Engineers, 1 (2), 23.
  3. J. Mijovic*, K-F. Lin, 1984, "The Effect of Hygrothermal Fatigue of Physical/Mechanical Properties and Morphology of Graphite/Epoxy Laminates," ACS Advances in Chemistry Series 206, 323.
  4. J. Mijovic*, K-F. Lin, 1985, "The Effect of Hygrothermal Fatigue on Physical/Mechanical Properties and Morphology of Neat Epoxy Resin and Graphite/Epoxy Composites," J. Appl. Polym. Sci., 30, 2527.
  5. J. Mijovic*, K-F. Lin, 1986, "Time-Dependent Changes in Morphology of Neat and Reinforced Epoxy Resins: Part Ⅰ. Neat Epoxies," J. Appl. Polym. Sci., 32, 3211.
  6. K-F. Lin*, 1989, "Time-Dependent Changes in Morphology of Neat and Reinforced Epoxy Resins: Part Ⅱ. Reinforced Epoxies," Bulletin of the College of Engineering, NTU, 47, 139.
  7. 林金福*、劉文雄，1991，"以磁性針狀γ-氧化鐵補強碳纖維/環氧樹脂積層板之層間強度"，中國航空太空學會學刊，第23卷第2 期? 179∼186頁。
  8. W.Y. Shu, K.F. Lin*, 1992, "The Effects of Additives on Curing Properties, Resin Contents, and Mechanical Properties of Gr/Ep Composites," Polymer Composites, 13(3), 213.
  9. K.F. Lin*, W.Y. Shu, T.L. Wey, 1993, "Organotransition Metal Complexes as Additives for Epoxy Resins: Part I. Their Effects on Toughness and Morphology of Epoxy Resins," Polymer, 34(2), 277.
  10. K.F. Lin*, W.Y. Shu, T.L. Wey, 1993, "Organotransition Metal Complexes as Additives of Epoxy Resins: Part II. Their interactions with Epoxy Resins." Polymer, 34(10), 2162.
  11. .W.Y. Shu, K.F. Lin*, 1993, "The Effects of Incorporating Chromium Acetylacetonate in Epoxy Matrix on Curing Behavior and Mechanical Properties of Gr/Ep Composites", J. of the Chinese Institute of Engineers 16, 395.
  12. K.F. Lin, F.W. Wang*, 1994,"Fluorescence Monitoring of Polarity Change and Gelation During Epoxy Cure," Polymer, 35(4), 687.
  13. K.F. Lin*, J.S. Lin, 1994, "Allylamine-Adducted Bismaleimide Resins: 1. The Curing Properties," J. Appl. Polym. Sci., 50, 1601.
  14. K.F. Lin*, S.K. Su, 1994, "Structural Relaxation Investigations of Glassy Polystyrene by Radial Distribution Functions," J. Macromolecular Sci.-Physics, 33(2), 143.
  15. K.F. Lin*, U.L. Chung, 1994, "Phase-Inversion Investigations of Rubber-Modified? Epoxies by Electron Microscopies and X-Ray Diffraction," J. Mater. Sci., 29, 1198.
  16. K.F. Lin*, J.S. Lin, 1994, "Allylamine-Adducted Bismaleimide Resins: II. Their? Physical/Mechanical Properties and Morpho- logy," J. Appl. Polym. Sci., 51, 513.
  17. K.F. Lin*, W.Y. Shu, 1994, “A Study on the Structure of Pre-Gelled Epoxy Networks”, Polymer, 35(16), 3535.
  18. K.F. Lin*, W.H. Wang, 1995, “The Effects of Imidazole and Chromium Acetylacetonate as Additives on the Curing Behavior and Fracture Toughness of Epoxy Resins and Their Composites”, Polymer Composites, 16 (4), 269.
  19. K.F. Lin*, J.C. Chen, 1996, “Curing Behavior, Compatibility and Fracture Toughness of Bismaleimide/Tetrafunctional Epoxy Resin Blends,” Polym. Eng. & Sci., 36(2), 211.
  20. K.F. Lin*, J.S. Lin, C.H. Cheng, 1996, “High Temperature Resins Based on Allylamine-Bismaleimides”, Polymer 37(21), 4729.
  21. B.L. Deng, W.Y. Chiu*, K.F. Lin, 1997, “Kinetic Model of Thermal Degradation of Polymers for Nonisothermal Process”, J. Appl. Polym. Sci. 66, 1855.
  22. K.F. Lin*, J.S. Lin, C.H. Cheng, 1997, “Synthesis, Curing, and Decomposition of Allylamine-Adducted 3,3’-Bismaleimido-diphe- nylsulphone Resins,” J. Polym, Sci. Polym. Chemistry ed., 35, 2469.
  23. K.F. Lin*, C.H. Cheng, 1997, “Allylamine-Adducted Bismaleimides used as a Toughening Agent and Processing Aid for TGDDM/DDS Epoxy Resins and Their Composites”, Proc. Natl. Sci. Counc. ROC(A), 21(4), 336.
  24. K.F. Lin*, Y.D. Shieh, 1998, “Core-Shell Particles Designed for Toughening the Epoxy Resins: I. Preparation and Characterization of Core-Shell Particles,” J. Appl. Polym. Sci., 69, 2069.
  25. K.F. Lin*, Y.D. Shieh, 1998, “Core-Shell Particles Designed for Toughening the Epoxy Resins: II. Core-Shell-Particle Toughened Epoxy Resins”, J. Appl. Polym. Sci., 70, 2313.
  26. K.F. Lin*, L.K. Chang, H.L. Cheng, 1999, “Morphology and Luminescence Properties of Poly(phenylenevinylene) and Poly(N-vinyl-pyrrolidone) Polyblends”, in “Field Responsive Polymers”, J. Simpson and I. Khan, Eds, ACS Symposium Series 726, American Chemical Society: Washington, D.C., Chapter 5, pp.71-87.
  27. K.F. Lin*, R.J. Yeh, 1999, “Low Moisture Absorptive Epoxy Formulations for Gr/Ep Laminates”, Polymer Composites, 20(3), 472.
  28. K.F. Lin*, S.L. Young, H.L. Cheng, Y.H. Cheng, 1999, “Influence of Aggregation and Dialysis on Conductivity of Salt-Free Polyelec- trolyte Solution in Dilute/Semidilute Region”, Macromolecules, 32, 4602.
  29. .H.L. Cheng, K.F Lin*, 1999, “Structural Characterization and Lumi- nescent Properties of Poly(p-phenylene vinylene) and Poly(ethylene glycol) Blends”, J. Polym. Res., 6(2), 123.
  30. Y.C. Chen, W.Y. Chiu*, K.F. Lin, 1999, “Kinetics Study of Imida- zole-Cured Epoxy-Phenol Resins”, J. Polym Sci. Polym. Chemistry Ed., 37, 3233.
  31. K.F. Lin*, H.L Cheng, 2000, “A Simple Method to Estimate the Chain Confor- mations of Polyelectrolytes in the Semidilute Regime”, Macromolecules, 33, 4961.
  32. H.L. Cheng, K.F. Lin*, 2001, “Energy Transfer from Poly(2-carboxy- phenylene- 1,4-diyl) to Poly(p-phenylenevinylene) in Bilayer Films and its Effects on Luminescence Properties”, Synth. Met., 122, 387.
  33. B. L. Deng*, W. Y. Chiu, K. F. Lin, M. S. Fuh, 2001, “Thermal Degradation Behavior of Epoxy Resin Blended with Propyl Ester Phosphazene”, J. Appl. Polym. Sci., 81, 1161.
  34. K. F. Lin*, J. Y. Shyu, 2001, “On Early Cure Behavior of a Liquid Dicyanate Ester? Resin”, J. Polym. Sci. Polym. Chemistry Ed., 39, 3085.
  35. K.F. Lin*, R. J. Yeh, P. W. Lin, 2002, “Two-Stage Moisture Absorption Behavior and Hydrolysis of Cured Dicyanate Ester Resins”, J. Polymer Research, 9, 31-36..???
  36. K.F. Lin*, R. J. Yeh, 2002, “Moisture Absorption Behavior of Rubber- Modified Epoxy Resins”, J Appl. Polym. Sci., 86, 3718.
  37. H.L. Cheng, K.F. Lin*, 2002, “Enhancing Emission of Poly(phenyleneviny- lene) by Sandwiching an energy transferable layer”, J. Mater. Chem., 12, 2270-2274.
  38. H.L. Cheng, K.F. Lin*, 2002, “Molecular Weight Dependence of Chain Conformation and Counterion Dissociation of Poly(xylylene tetrahydro- thiophenium chloride) in the Salt-Free Semidilute Aqueous Solutions”, Langmuir,18, 7287.
  39. C.C. Chiu, K.F. Lin*, H.L. Chow, 2003, “Chain Composition Dependence of Luminescence Properties for Copolymers of 2-Methoxy-5-2’-ethyl-hexyloxy-1,4- phenylenevinylene and 2,3-Diphenyl-5-octyl-1,4-phenylenevinylene”, J. Polym. Sci. Polym. Chemistry Ed., 41, 2180-2186.
  40. .H.L. Cheng, K. F. Lin*, 2003, “Counterion Dissociaton Dependence of Chain Conformation for Poly(xylylene tetrahydrothiophenium chloride) in Semidilute Aqueous Solution”, Macromolecules, 36, 6949-6951.
  41. 周宣良，林金福*，韓于凱，王鼎章，2003，「MEH-PV與DPO-PV共聚合物鏈段組成對光電性質之影響」，台大工程學刊，89，111-119.
  42. .C.F. Gun, K. F. Lin*, 2004, “Synthesis of Hexa-Allylamino- Cyclotriphaphazene as a Reactive Fire Retardant for Unsaturated Polyesters”, J. Appl. Polym. Sci., 91, 697-702.
  43. K. F. Lin*, H. L. Cheng, Y. H. Cheng, 2004, “Dependence of Chain Conformation on Degree of Sulfornation and Counterion Dissociation of Sodium Poly(styrene sulfonate) in Sedmidilute Aqueous Solution”, Polymer, 45, 2387-2392.
  44. H.L. Chow, K.F. Lin*, Y.L. Fan, D.C. Wang, 2005, “Enhancing the Quantum Efficiency of MEH-PPV through the Reduction of Chain Aggregation by Thermal Treatment”, J. Polym. Sci. Part B: Polym. Phys. 43, 1705-1711
  45. K.F. Lin*, C.Y. Hsu, T.S. Huang, W.-Y. Chiu, Y.-H. Lee, T.H. Young, 2005, “A Novel Method to Prepare the Chitosan/Montmorillonite Nanocomposities”, J. Appl. Polym. Sci., 98, 2042-2047.
  46. Y.L Fan, K.F. Lin*, 2005, “Dependence of Luminescent Properties and Chain Length of ?Poly[2-methoxy-5-(2’-ethyl-hexyloxy)-1,4- phenylenevinylene] on the Formation of cis-Vinylene Bonds during Gilch Polymerization”, J. Polym. Sci. Part A: Polym. Chem, 43, 2520-2526.
  47. C.-C. Hsieh, K.F. Lin*, 2005, “Molecular Aggregations and Supramolecular Architectures of Amphiphilic PEO17–OPV3 and Its Hybrid with Silica”, J. Mater. Chem., 15, 4154-4160.
  48. H.L. Chou, K.F. Lin*, D. C. Wang, 2006, “Miscibility and Luminescence Properties of MEH-PPV/DPO-PPV Polyblends”, J. Polym. Res., 13, 79-84.
  49. H.L. Chou, K.F. Lin*, D. C. Wang, 2006, “Enhancing Electroluminescent Efficiency of MEH-PPV/DPO-PPV Polyblends by Introducing Chemical Bonding through Thermal Treatments”, J. Polym. Sci. Part B: Polym. Phys. 44, 62-69.
  50. .K.F. Lin*, Y.L. Fan, H.L. Chow, 2006, ““Origin of the Methylene Bonds in Poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylen`e] Prepared Accor- ding to Gilch's Method: Novel Applications”, Polym. Int. 55, 938-944.
  51. C.C. Hsieh, K.F. Lin*, and A.T. Chien, 2006, “Fabrication of PEO17-OPV3 Templated Titania Nano hollow-rods and Their Aggregating Microspheres”, Macromolecules, 39, 3043-3047.
  52. J. Jeng, C.A Dai,* W.Y. Chiu, C.S. Chern, K.F. Lin, P.Y. Young, 2006, "Influence of Hexadecane on the Formation of Droplets and Growth of Particles for Methyl Methacrylate Miniemulsion Polymerization", J. Polym. Sci. Part A: Polym.Chem. 44, 4603-4610.
  53. K.F. Lin,* S.C. Lin, A.T. Chien, C.C. Hsieh, M.H. Yen, C.H., Lee, C.S. Lin, W.Y. Chiu, Y.H. Lee, 2006, “Exfoliation of Montmorillonite by Inserting Disk-like Micelles via Soap-Free Emulsion Polymerization of Methyl Methacrylate”, J. Polym. Sci. Part A: Polym.Chem. 44, 5572-5579.
  54. B.Y. Chen, Y.H. Lee,* W.C. Lin, F.H. Lin, K.F. Lin, 2006, “Understanding the Characteristics of L-Ascorbic Acid-Montmorillonite Nanocomposite: Chemical Structure and Biotoxicity”, Biomedical Engineering: Applications, Basis & Communications, 18, 30-36.
  55. T.S. Lim, J.C. Hsiang, J.D. White, J.H. Hsu, Y.L. Fan, K.F. Lin, W. S. Fann,* 2007, “Single short-chain conjugated polymer studied with optical spectroscopy: A donor-accepter system”, Physical Review B 75, 165204-1~9.
  56. A.T. Chien, K.F. Lin*, 2007, “Morphology and Permeability of Exfoliated PVAc-MMT Nanocomposite Films Cast From Soap-Free Emulsion-Polymerized Latices”, J. Polym. Sci. Part A: Polym.Chem., 45, 5583-5589.
  57. C.W. Tu, K.Y. Liu, A.T. Chien, M.H. Yen, T.H. Weng, K.C. Ho, K.F. Lin*, 2008, “Enhancement of Photocurrent of Polymer-Gelled Dye-Sensitized Solar Cell by Incorporation of Exfoliated Montmorillonite Nanoplatelets” , J. Polym. Sci. Part A: Polym. Chem., 46, 47-53.
  58. A.T. Chien, Y.H. Lee, K.F. Lin*, 2008, "Crosslinkable PVAc/Clay Nanocomposite Films Cast from Soap-free Emulsion Polymerized Latices", J. Appl. Polym. Sci., 106, 355-362.
  59. C.W. Tu, Ke.Y. Liu, A.T. Chien, C.H. Lee, K.C.Ho, K.F. Lin*, 2008, “Performance of Gelled-Type Dye-Sensitized Solar Cells Associated with Glass Transition Temperature of Gelatinizing Polymers”, Eur. Polym. J., 44, 608-614.
  60. .C.H. Lee, A.T. Chien, M.H. Yen, K.F. Lin*, 2008, ““Poly(methyl acrylate-co-methyl methacrylate)/Montmorillonite Nanocomposites Fabricated by Soap-free Emulsion Polymerization”, J. Polym. Res., 15, 331-336.
  61. ?Y.H. Lee, B.Y. Chen*, K.Y. Lin, K.F Lin, F.H. Lin, 2008, “Feasibility Study of Using Montmorillonite for Stability Enhancement of L-Ascorbic Acid”, Journal of the Chinese Institute of Chemical Engineers, 39, 219-226.
  62. K.J. Lin, C.A. Dai, K.F. Lin*, 2009, “Revisit to the Formation Mechanism of Exfoliated Montmorillonite/PMMA Nanocomposite latex through Soap-Free Emulsion Polymerization”, J. Polym. Sci. Part A: Polym.Chem 47, 459-466.
  63. M.H. Yen, K.F. Lin*, 2009, “Atypical Transition Temperature Dependence of Poly(N-isopropylacrylamide) and Poly(N-isopropylacrylamide-co-acrylamide) Nanocomposites on the Content of Exfoliated Montmorillonites”, J. Polym. Sci. Part B: Polym.Phys （in press）


TOP